epoxy resin pegboards - Phenolic pegboards - lab top drying racks - laboratory peg boards - stainless steel troughs - poly pegs - drip trays
Additional Navigation
International Service
Recent Events
> Click To Contact Us
> Click To Contact Us
The International Show for Tomorrow's Technology.
> Click To Contact Us
Contact Total Lab Solutions About Our Involvement in These Major International Laboratory Exhibitions.
Translate Our Website
Epoxy Resin Peg Boards / Drying Racks
Duratop Epoxy laboratory peg boards or drying racks are made in the same custom colors as our solid cast epoxy
laboratory tops, sheet material and sinks, to meet the demands of architects, consultants and end-users. Whether the requirement is for like or contrasting colors in the work or school environment, Duratop epoxy drying racks meet those requirements. Peg boards or drying racks are made from 1" thick (25mm) sheet stock, with 3/8" (9.525mm) diameter holes and 2 prong removable polypropylene pegs and stainless-steel drip troughs with drain outlet and hose.
Architectural specification for DRYING RACK / PEGBOARDS
Epoxy Drying Rack
1. Comply with requirements for molded cast epoxy resin pegboards specified under
laboratory tops in this Section and as described herein.
2. Drying Rack bodies shall be of one inch thick (1" - 25mm) black epoxy with a 3/16"
inch to ¼ inch radius on all edges and corners. Each drying rack shall be of
the size and with the peg arrangement shown on the Laboratory Furnishing drawings.
3. Pegs shall be of injection molded white or black polypropylene. Pegs shall not
be bonded into the body, but shall be held in position by mechanical
design and easily removed when necessary.
4. Provide a drip trough of Type 304 stainless steel with a 16 gauge,
Type 304 stainless steel screen of 14 X 14 mesh, .02 wire, optional.
5. Provide stainless steel fixing screws of appropriate type for
attachment to support structure, by installation contractor.
6. Provide clear, tight-fitting hose to drain from drip tray to sink.
Duratop epoxy resin laboratory peg boards, are available in the following standard sizes, with custom sizes made to order:
DURATOP Epoxy Resin Lab Peg Board Sizes
1" (25 MM Thick)
Imperial Sizing |
Metric Sizing |
18" x 24" with 21 Pegs |
457 mm x 610 mm |
20" x 30" with 32 Pegs |
508 mm x 762 mm |
24" x 24" with 28 Pegs |
610 mm x 610 mm |
24" x 30" with 39 Pegs |
610 mm x 762 mm |
30" x 24" with 39 Pegs |
762 mm x 610 mm |
30" x 30" with 46 Pegs |
762 mm x 762 mm |
30" x 36" with 56 Pegs |
762 mm x 914 mm |
30" x 42" with 68 Pegs |
762 mm x 1067 mm |
32" x 30" with 53 Pegs |
813 mm x 762 mm |
36" x 30" with 60 Pegs |
914 mm x 762 mm |
36" x 36" with 68 Pegs |
914 mm x 914 mm |
42" x 30" with 68 Pegs |
1067 mm x 762 mm |
48" x 30" with 81 Pegs |
1219 mm x 1219mm
|
Non-standard size Duratop Epoxy Peg boards are available to meet any specification or requirement.
Produced in all Duratop Epoxy Colors.
Polypropylene (PP) pegs are produced with 2 Prongs in either black or white color,
Lengths are 5" (127 mm); 6.5" (165 mm) and 8" (200 mm).
Black PP Pegs 6.5" - two prong are industry standard and in stock.
Dura-Line Stainless Steel Troughs (SST) are produced from 20 gauge, type 304 stainless steel #4 finish that mount from the underside or bottom of a Duratop Epoxy or Trespa solid phenolic style Pegboard with a 3/4" (19 MM) flange. All troughs come complete with three feet of clear, flexible PVC drain hose tubing and have pre-drilled holes for easy attachment. All Troughs are available in industry standard 2" (50 mm) or 4" (100 mm) widths and 1" (25 MM) depth.
Stainless Steel Trough Sizes |
|
Model Number |
Dimension |
SST-18-2 |
18" x 2" |
SST-18-4 |
18" X 4" |
SST-20-2 |
20" X 2" |
SST-20-4 |
20" X 4" |
SST-24-2 |
24" X 2" |
SST-24-4 |
24" X 4" |
SST-30-2 |
30" X 2" |
SST-30-4 |
30" X 4" |
SST-32-2 |
32" X 2" |
SST-32-4 |
32" X 4" |
SST-36-2 |
36" X 2" |
SST-36-4 |
36" X 4" |
SST-42-2 |
42" X 2" |
SST-42-4 |
42" X 4" |
SST-48-2 |
48" X 2" |
SST-48-4 |
48" X 4" |
See apparatus rod assemblies - click here: