Sign Up
Additional Navigation
International Service
Upcoming Events
Kuwait Lab
Lab Indonesia: May 8 - 10, 2012. Jakarta, Indonesia.
> Click To Contact Us


Arab Lab Logo
Labs 21 2010: Annual Conference September 28 -30, 2010. Albuquerque, New Mexico.
> Click To Contact Us

Arab Lab Logo
ArabLab - The Expo: 2012. The International Show for Tomorrow's Technology.
> Click To Contact Us

Contact Total Lab Solutions About Our Involvement in These Major International Laboratory Exhibitions.


Translate Our Website

Watersaver Emergency Drench Showers

Jump To:
Emergency Drench Showers
Floor Mount Eye Wash and Showers
Recessed Safety Stations

Emergency Drench Showers

DESCRIPTION
COLORED RENDERING

G1635-ES635
Emergency Shower, Vertically Mounted, with ABS Plastic Shower Head

  1. Application: Emergency shower for vertical mounting.
  2. Shower head: 10" diameter. Shower head is orange ABS plastic (ES635) or stainless steel (ES635SSH).
  3. Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Supply: 1" NPT female inlet.
  5. Sign: ANSI-compliant identification sign. 

Additional Options:

  • GRN - Safety green ABS plastic shower head.
  • YEL - Safety yellow ABS plastic shower head.
  • PCH - Polished chrome plated cast brass shower head.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • SC - Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1 - 2004.
  • SSH - Stainless steel shower head.
  • AP280-100 - Flashing Electric Light and Horn Alarm Horn serve to summon assistance when shower is activated.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004. Refer to “Tempering Units” section for complete technical and product selection information.
G1635-ES635

DESCRIPTION
COLORED RENDERING

G1643-ES643
Emergency Shower, Horizontally Mounted, with ABS Plastic Shower Head

  1. Application: Emergency shower for horizontal mounting.
  2. Shower head: 10" diameter. Shower head is orange ABS plastic (ES643) or stainless steel (ES643SSH).
  3. Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Pipe and fittings: 1" IPS galvanized steel nipple with orange ABS plastic elbow (ES643) or galvanized street elbow (ES643SSH).
  5. Supply: 1" NPT female inlet.
  6. Sign: ANSI-compliant identification sign.

Additional Options:

  • PCC - All-polished chrome plated brass construction.
  • GRN - Safety green ABS plastic shower head.
  • YEL - Safety yellow ABS plastic shower head.
  • PCH - Polished chrome plated cast brass shower head.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • SSH - Stainless steel shower head.
  • SC - Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1 - 2004.
  • AP280-100 - Electric Light and Alarm Horn Flashing light and horn serve to summon assistance when shower is activated.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
  • AP250-015 - Modesty Curtain for horizontal shower installation.
G1643-ES643

Floor Mount Eye Wash and Emergency Drench Showers

DESCRIPTION
COLORED RENDERING

G1662-ES662
Emergency Shower, Free Standing, with ABS Plastic Shower Head

  1. Application: Free standing emergency shower.
  2. Shower head: 10" diameter. Shower head is orange ABS plastic (ES662) or stainless steel (ES662SSH).
  3. Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers on vertical piping for high visibility and corrosion resistance.
  5. Supply: 1 1/4" NPT female top or side inlet.
  6. Sign: ANSI-compliant identification sign.

Additional Options:

  • PCC - All-polished chrome plated brass construction.
  • GRN - Safety green ABS plastic shower head.
  • YEL - Safety yellow ABS plastic shower head.
  • PCH - Polished chrome plated cast brass shower head.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • SC - Self-closing ball valve. Note: Emergency showers with self-closing valves do not comply with ANSI Z358.1 - 2004.
  • HS - Auxiliary hand-held drench hose for rinsing eyes, face or body. Unit has single FS-Plus™ spray type outlet head, self-closing valve with squeeze handle, 8 ft. reinforced PVC hose and mounting bracket.
  • SSH - Stainless steel shower head.
  • AP280-100 - Electric Light and Alarm Horn
    Flashing light and horn serve to summon assistance when shower is activated.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
  • AP250-015 - Modesty curtain for horizontal shower installation.
G1662-ES662

RETURN TO TOP

DESCRIPTION
COLORED RENDERING
G1950-SS950
Safety Station with Eye/Face Wash, Stainless Steel Bowl
  1. Application: Combination eye/face wash and shower safety station. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.
  2. Shower head: 10" diameter orange ABS plastic.
  3. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Spray head assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.
  5. Eye/face wash bowl: 11 1/2" stainless steel.
  6. Eye/face wash valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.
  7. Pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.
  8. Supply: 1 1/4" NPT female top or side inlet.
  9. Waste: 1 1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples.
  10. Sign: Furnished with ANSI-compliant identification sign.
  11. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Additional Options:

  • GC - Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • HS - Auxiliary hand-held drench hose for rinsing eyes, face or body.
  • GRN - Green ABS plastic shower head and bowl.
  • YEL - Yellow ABS plastic shower head and bowl.
  • SSH - Stainless steel shower head.
  • AP275-100 - Electric Light and Alarm Horn summon assistance when eye/face wash or shower is activated.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
G1950-SS950

DESCRIPTION
COLORED RENDERING

G-1950P-SS950P
Safety Station with Eye/Face Wash, ABS Plastic Bowl

  1. Application: Combination eye/face wash and shower safety station. Two large FS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes and face.
  2. Shower head: 10" diameter orange ABS plastic.
  3. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Spray head assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from water.
  5. Eye/FACE wash bowl: 11 1/2" ABS plastic.
  6. Eye/FACE wash valve: 1/2” IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.
  7. Pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.
  8. Supply: 1 1/4" NPT female top or side inlet.
  9. Waste: 1 1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples.
  10. Sign: Furnished with ANSI-compliant identification sign.
  11. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Additional Models:

  • Eyewash is activated by flag handle or foot treadle.
  • GC - Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • GRN - Green ABS plastic shower head and bowl.
  • YEL - Yellow ABS plastic shower head and bowl.
  • SSH Stainless steel shower head.
  • AP275-100 - Electric Light and Alarm Horn summon assistance when eye/face wash or shower is activated.
  • AP250-015 - Modesty curtain for mounting on safety station.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
G1950P-SS950P

DESCRIPTION
COLORED RENDERING

G1902HFC-SS902HFC
Station with Eyewash, Hand and Foot Control, Stainless Steel Bowl
or alternatively ABS Plastic Bowl

  1. Application: Combination eyewash and shower safety station. Eyewash is activated by flag handle or foot treadle. Two GS-Plus™ spray-type outlet heads deliver a flood of water for rinsing eyes.
  2. Shower head: 10" diameter orange ABS plastic.
  3. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Spray head assembly: Two GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  5. Eyewash bowl: 11 1/2" diameter. Bowl is stainless steel (SS902HFC) or orange ABS plastic (SS902P-HFC).
  6. Eyewash valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position.
  7. Pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.
  8. Supply: 1 1/4" NPT female top or side inlet.
  9. Waste: 1 1/4" NPT female outlet.
  10. Sign: Furnished with ANSI-compliant identification sign.
  11. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment.

Additional Options:

  • GC - Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • P - Orange ABS plastic bowl.
  • GRN - Green ABS plastic shower head and bowl.
  • YEL - Yellow ABS plastic shower head and bowl.
  • SSH Stainless steel shower head.
  • AP275-100 - Electric Light and Alarm Horn summon assistance when eye/face wash or shower is activated.
  • AP250-015 - Modesty Curtain
    Modesty curtain for mounting on safety station.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
G1902HFC-SS902HFC

DESCRIPTION
COLORED RENDERING

SSBF909-SS909
Safety Station with WideArea™ Eye/Face Wash, S/S Bowl and Four Spray-Type Outlet Heads

  1. Application: Combination WideArea™ eye/face wash and shower safety station. Four GS-Plus™ spray-type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face.
  2. Shower head: 10" diameter orange ABS plastic.
  3. Shower valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Spray head assembly: Four GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  5. Eye/face wash bowl: 11 1/2" diameter. Bowl is stainless steel (SS909) or orange ABS plastic (SS909P).
  6. Eye/face wash valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon® seals.
  7. Pipe and fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance.
  8. Supply: 1 1/4" NPT female top or side inlet.
  9. Waste: 1 1/4" NPT female outlet. Outlet can be positioned at either 8" or 20" above finished floor by reversing lower pipe nipples.
  10. Sign: Furnished with ANSI-compliant identification sign.
  11. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. 

Additional Options:

  • GC - Powder coated finish on galvanized pipe and fittings. Available colors include orange, yellow, red and green.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • P - Orange ABS plastic Bowl.
  • GRN - Green ABS plastic shower head.
  • YEL - Yellow ABS plastic shower head.
  • SSH - Stainless steel shower head.
  • AP275-100 - Electric Light and Alarm Horn
    Light and alarm horn summon assistance when eye/face wash or shower is activated.
  • AP250-015 - Modesty Curtain
    Modesty curtain for mounting on safety station.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
G1909

DESCRIPTION
COLORED RENDERING

G1994HFC-SS994HFC
Safety Station with WideArea™ Eye/Face Wash, Hand and Foot Control,
All-Stainless Steel

  1. Application: All-stainless steel combination WideArea™ eye/face wash and shower safety station. Stainless steel construction is ideal for highly corrosive environments and clean room applications. Eye/face wash is activated by flag handle or foot treadle. Four GS-Plus™ spray-type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face.
  2. Shower head: 10" diameter stainless steel.
  3. Shower valve: 1" IPS Type 316 stainless steel stay-open ball valve. Valve has stainless steel ball and Teflon® seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod.
  4. Spray head assembly: Four GS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.
  5. Eye/face wash bowl: 11 1/2" diameter stainless steel.
  6. Eye/face wash valve: 1/2" IPS Type 316 stainless steel stay-open ball valve. Valve has stainless steel ball and Teflon® seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position.
  7. Pipe and fittings: Schedule 40 Type 304 brushed stainless steel. Furnished with orange polyethylene covers for vertical piping for high visibility.
  8. Supply: 1 1/4" NPT female top or side inlet.
  9. Waste: 1 1/4" NPT female outlet.
  10. Sign: Furnished with ANSI-compliant identification sign.
  11. Quality assurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. 

Additional Options:

  • BC - Stainless steel cover for eye/face wash bowl.
  • FC20 - Regulates shower flow rate to 20 GPM.
  • AP275-100 - Electric Light and Alarm Horn
    Light and alarm horn summon assistance when eye/face wash or shower is activated.
  • AP250-015 - Modesty Curtain for mounting on safety station.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
G1994HFC-SS994HFC

Recessed Safety Stations

DESCRIPTION
COLORED RENDERING

GBF2150-SSBF2150
Recessed Safety Station with Drain Pan, Stainless Steel Shower Head

  1. Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted exposed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage.
  2. ADA compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
  3. Shower head: 10" diameter stainless steel (SSBF2150) or 8" diameter chrome plated cast brass (SSBF2150PCC).
  4. Shower valve: 1" IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
  5. Cover/Drain pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.
  6. Eye/Face wash spray head assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water.
  7. Eye/Face wash valve: 1/2" IPS brass rotating plug-type valve. Furnished with Teflon® coated O-ring seals and in-line strainer to protect valve from debris and foreign matter.
  8. Mounting: 16 gauge stainless steel cabinet with flanged rim for recessed mounting in wall. Unit fits in standard
    3 5/8" deep wall.
  9. Pipe and fittings: Exposed pipe and escutcheon are brushed stainless steel (SSBF2150) or polished chrome plated brass (SSBF2150PCC).
  10. Supply: 1" NPT female inlet.
  11. Waste: 2" NPT female outlet.
  12. Sign: Furnished with ANSI-compliant identification sign.
  13. Quality assurance: Unit is completely assembled and water tested prior to shipment.
  14. U.S. patent 5,768,721

Additional Models:

  • PCC - All-polished chrome plated brass construction.
  • AP250-065 - Modesty Curtain
  • AP280-230 - Electric Light and Alarm Horn
  • TMV AP3800 - Thermostatic mixing valve.
GBF2150-SSBF2150SSBF2150-2

DESCRIPTION
COLORED RENDERING

GBF2152-SSBF2152
Recessed Safety Station with Drain Pan and Daylight Drain, Stainless Steel Shower Head

  1. Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted exposed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage. Rather than connecting to building drainage system, unit has 1 1/2" OD drain connection on front of unit for waste water. Front drain provides for less costly installation while facilitating regular testing of unit.
  2. ADA compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
  3. Shower head: 10" diameter stainless steel (SSBF2152) or 8" diameter chrome plated cast brass (SSBF2152PCC).
  4. Shower valve: 1" IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
  5. Cover/Drain pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.
  6. Eye/Face wash spray head assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water.
  7. Eye/Face wash valve: 1/2" IPS brass rotating plug-type valve. Furnished with Teflon® coated O-ring seals and in-line strainer to protect valve from debris and foreign matter
  8. Mounting: 16 gauge stainless steel cabinet with flanged rim for recessed mounting in wall. Unit fits in standard
    3 5/8" deep wall.
  9. Pipe and fittings: Exposed pipe and escutcheon are brushed stainless steel (SSBF2152) or polished chrome plated brass (SSBF2152PCC).
  10. Supply: 1" NPT female inlet.
  11. Waste: 1 1/2" OD tailpiece with stainless steel cover.
  12. Sign: Furnished with ANSI-compliant identification sign.
  13. Quality assurance: Unit is completely assembled and water tested prior to shipment
  14. U.S. patent 5,768,721

Additional Models:

  • PCC - All-polished chrome plated brass construction.
  • AP250-065 - Modesty Curtain
  • AP280-230 - Electric Light and Alarm Horn
  • TMV AP3800 - Thermostatic mixing valve.
GBF2152

DESCRIPTION
COLORED RENDERING

GBF2160-SSBF2160
Recessed Safety Station with Drain Pan, S/S Ceiling Mount Concealed Shower Head

  1. Application: Recessed barrier-free eye/face wash and shower safety station with ceiling mounted concealed shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage.
  2. ADA compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
  3. Shower head: 10" diameter with flange for flush mounting in ceiling. Shower head is stainless steel (SSBF2160) or polished chrome plated cast brass (SSBF2160PCC).
  4. Shower valve: 1" IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
  5. Cover/Drain pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.
  6. Eye/Face wash spray head assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water.
  7. Eye/Face wash valve: 1/2" IPS brass rotating plug-type valve. Furnished with Teflon® coated O-ring seals and in-line strainer to protect valve from debris and foreign matter.
  8. Mounting: 16 gauge stainless steel cabinet with flanged rim for recessed mounting in wall. Unit fits in standard 3 5/8" deep wall.
  9. Supply: 1" NPT female inlet.
  10. Waste: 2" NPT female outlet.
  11. Sign: Furnished with ANSI-compliant identification sign.
  12. Quality assurance: Unit is completely assembled and water tested prior to shipment.
  13. NOTE: ANSI Z358.1-2004 specifies that shower heads be installed no more than 96" above the finished floor. This unit should therefore not be installed in ceilings over 8 feet. For higher ceiling heights, we recommend the SSBF2150 or SSBF2170 units.
  14. U.S. patent 5,768,721

Additional Options:

  • AP250-065 - Modesty Curtain
  • AP280-230 - Electric Light and Alarm Horn
  • TMV AP3800 - Thermostatic mixing valve.
GBF2160SSBF2150-2

DESCRIPTION
COLORED RENDERING

GBF2170-SSBF2170
Recessed Safety Station with Drain Pan, Wall Mount S/S Shower Head

  1. Application: Recessed barrier-free eye/face wash and shower safety station with wall mounted shower head and drain pan. Stainless steel cover provides attractive appearance and protects unit when not in use. When activated, cover serves as pan to collect waste water and return it into unit for drainage.
  2. ADA compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
  3. Shower head: 10" diameter stainless steel (SSBF2170) or 8" diameter chrome plated cast brass (SSBF2170PCC). Furnished with horizontal supply pipe and wall escutcheon.
  4. Shower valve: 1" IPS brass stay-open ball valve with stainless steel “panic bar” actuator.
  5. Cover/Drain pan: 16 gauge stainless steel combination cover and drain pan. Grasping “panic bar” handle and opening cover pulls spray head assembly down from vertical to horizontal position, activating water flow. While unit is in operation, waste water is collected in drain pan and returned into cabinet for drainage. Unit remains in operation until cover is returned to closed position.
  6. Eye/Face wash spray head assembly: Two FS-Plus™ spray heads mounted on supply arms. Each spray head has individually adjustable flow control and filter to remove impurities from water.
  7. Eye/Face wash valve: 1/2" IPS brass rotating plug-type valve. Furnished with Teflon® coated O-ring seals and in-line strainer to protect valve from debris and foreign matter.
  8. Mounting: 16 gauge stainless steel cabinet with flanged rim for recessed mounting in wall. Unit fits in standard 3 5/8" deep wall.
  9. Pipe and fittings: Exposed pipe and escutcheon are brushed stainless steel (SSBF2170) or polished chrome plated brass (SSBF2170PCC).
  10. Supply: 1" NPT female inlet.
  11. Waste: 2" NPT female outlet.
  12. Sign: Furnished with ANSI-compliant identification sign.
  13. Quality assurance: Unit is completely assembled and water tested prior to shipment.
  14. U.S. patent 5,768,721

Additional Options:

  • PCC - All-polished chrome plated brass construction.
  • AP250-065 - Modesty Curtain
  • AP280-230 - Electric Light and Alarm Horn
  • TMV AP3800 - Thermostatic mixing valve.
GBF2170

DESCRIPTION
COLORED RENDERING

GBF1670-ESB670 or SSBF670-721
Recessed Emergency Shower, Ceiling Mount S/S Shower Head

  1. Application: Recessed emergency shower with ceiling mounted exposed shower head. Recessed shower conserves valuable floor space, while eliminating the clutter and obstruction created by conventional shower equipment. Unit can be installed in either a corridor or a lab room, close to where accidents might occur.
  2. ADA compliance: When installed at recommended mounting heights, unit complies with ADA requirements for accessibility by handicapped persons.
  3. Shower head: 10" diameter stainless steel (ESBF670) or 8" diameter polished chrome plated cast brass (ESBF670PCC). Furnished with vertical supply pipe and ceiling escutcheon for mounting shower head at desired height below finished ceiling.
  4. Valve: 1" IPS brass stay-open ball valve with stainless steel “panic bar.” Pulling bar down activates shower; shower remains in operation until bar is returned to original closed position. Furnished with stainless steel access panel and 1" IPS unions for valve.
  5. Pipe and fittings: Exposed pipe and escutcheon are brushed stainless steel (ESBF670) or polished chrome plated brass (ESBF670PCC).
  6. Supply: 1" NPT female inlet.
  7. Sign: ANSI-compliant identification sign.
  8. U.S. patent 5,768,721 

Additional Models:

  • FC20 - Regulates shower flow rate to 20 GPM.
  • PCC - All-polished chrome plated brass construction.
  • AP250-065 - Modesty Curtain
    Modesty curtain for wall mounting.
  • AP280-230 - Electric Light and Alarm Horn
    Flashing light/alarm horn unit is recess mounted in finished wall. Light is illuminated and horn sounds when shower is activated.
  • TMV AP3800 - Thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by ANSI Z358.1-2004.
GBF1670ESBF670-2

RETURN TO TOP